Updating method My free cams sunshinekelly tube
But the Compute Board also has a FPGA, in charge of routing the IOs between the processor (So C, System-on-Chip to be precise) and the motors plus flight controller.
In certain cases, the FPGA will need to be flashed too.
A Flight Controller is included in the Intel Aero Ready to Fly Drone and this FC needs to be updated too.
The current release of Intel Aero includes the recommended version for PX4.
Then connect the battery to Intel Aero XT60 connector.
A short press of the power button should switch on Intel Aero.
It is usually able to sync and flash within 10 seconds, but can take longer in some cases.Windows users can use Win32 Disk Imager and Linux/Mac OS users can use the following command in the terminal: The commands above will verify you have a valid USB drive connected, do some sanity checks and reboot into the update image.Here's how to follow the flash progress during the alternate method flash: is one of the firmwares above.By default the Drone is working: If you plan to fly with the remote control, go to the first flight page.You can also enable the video streaming between the drone and your computer.